CyanView RiO (Remote IO) tillåter användare att fjärrstyra kameror över LAN eller WiFi.
Introduction:
Any camera can be controlled using RIO Live over LAN or Wifi. Protocols include serial data, LANC, USB, wifi, Blackmagic SDI, SBU.The RIO live is a mix between a CI0: it has the serial ports, display and buttons, and a RCP: it has all the protocols inside, same web UI
It is a standalone device, for e.g. lens control, USB cameras (mirrorless, etc.), WiFi LAN control, and production tools as Polecam that you can link with a RCP for the remote shading.
Compared to a CI0 (which is a slave device) the RIO Live is a standalone device.
- if you unplug RCP, the camera/lens is still controlled
-
the link between a RCP and a RIO Live is more robust on unreliable networks (WiFi, etc.)
-
configuration is totally different, you configure on RIO web UI and import on RCP
Wiring:
The RIO and RCP will communicate together over IP (via a switcher).
Power:
Compared to CI0, the RIO Live was designed for bigger cameras where you normally do not have PoE. And we wanted it as small as possible (PoE is taking a lot of space), so RIO Live is not PoE, but you can power it using DC from:
- Anton Bauer D-Tap (from e.g. a camera, or directly from a battery, etc.)
- PSU
DC IN voltage is between 10V and 24V.
The input voltage will be directly applied to the camera so if you power from batteries, make sure the camera does support the higher battery voltage as well. For thermal reasons, camera consumption should not exceed 12W by port.
Please note that you can upgrade a RIO Live to a RIO at any time via Internet - it is just a licence, one time fee.