För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.

SnakeSys Noder

Filtrera & sortera
Antal artiklar 2
ChamSys SnakeSys B4 Ethernet Node 4xUniv DMX512
Nätverks nod samt DMX splitter
In: Nätverk(ArtNet sACN) +1x5p-XLR Ut:4x5p-XLR

The SnakeSys B4 is a four universe DMX to Ethernet convertor. It supports four DMX512 ports that are configurable as either inputs or outputs and one DMX port that is always assigned as an input. The SnakeSys B4 is designed as a multi purpose box to be used in places where a small portable Ethernet to DMX conversion solution is required.

  • Universal Ethernet to DMX Interface
  • Four DMX512 Ports (configurable as input or output)
  • One dedicated DMX512 input port
  • Art-Net and ACN Streaming DMX support
  • Universe selectable by rotary switches
  • ChamNet remote configuration
  • Stand-alone DMX buffer mode
  • Can be powered by Power over Ethernet

The SnakeSys B4 supports both Art-Net and ACN Streaming DMX network protocols. The DMX512 ports are fully configurable with DMX packet length, framing rate, and timings. In addition the SnakeSys B4 can operate in a non-network mode as a simple four port DMX buffer.

The SnakeSys B4 can be configured from the front panel using a 4-way DIP switch, and 2 rotary switches. In addition the interface can be set to ChamNet mode, where the SnakeSys B4 is configurable from the MagicQ console, avoiding the need for local configuration.

Multiple SnakeSys B4s can be used on a single network, either configured directly from the unit or by using ChamNet control from a MagicQ console. Multiple SnakeSys B4s can be syncronised together to ensure that the DMX output from the console is consistent and does not involve "tearing" either within universes or across multiple universes.

The SnakeSys B4 can be powered from the SnakeSys R4 or SnakeSys RP8 thus avoiding the need to run separate power cables. Alternatively, the SnakeSys B4 can be powered directly from mains input on a locking Powercon connector.

When connected via network to MagicQ, the SnakeSys B4 unlocks the restricted features of MagicQ such as the full screen Execute Window and remote control.


Four DMX512 ports via female 5-pin XLR
One DMX512 dedicated input port via male 5-pin XLR
Art-Net, ACN Streaming DMX protocols
Can be powered by Power over Ethernet
Isolated outputs
Art-Net subnet and universe selection via rotary switches
Power, Network and Protocol status LEDs
Individual output status LEDs
Locking Neutrik Ethercon network connector
Locking Neutrik Powercon power connector. 


Input voltage: 90 to 250V AC
Width: 168mm
Depth: 164mm
Height: 60mm
Weight: 861g

Pris exkl.9891
ChamSys SnakeSys S6 (T2) Ethernet Node-2xUniv DMX512 Trossmodell

The SnakeSys S6 (T2) is a rugged truss mountable two universe Ethernet to DMX convertor with an in-built network switch supporting three separate DMX output sockets per universe.

  • Two universes
  • Three 5-pin DMX output sockets per universe
  • Four network ports
  • Can be powered by Power over Ethernet
  • LCD display and buttons for configuration
  • RDM capability (subject to firmware development)
  • Serial port connecter - e.g for connecting projectors
  • Hook clamp fixable in three different orientations
  • Omega clamp fixable in four different orientations

The SnakeSys T2 includes a battery so that it can be configured even when there is no mains power, for example when preping the lighting rig.  Pressing the centre button activates the unit giving access to the menu systems.  The configuration is stored within the unit.  The front panel also includes a label area for marking up the box with a pen if required.

The SnakeSys T2 supports both Art-Net and ACN support, along with ChamNet to allow remote management over the network connection. When in ChamNet mode, the configuration data is stored on board, allowing the device to be restarted.

Supports Hook Clamp or Omega Clamp.  Three mounting points for omega clamps allow the unit to support four different orientations for convenient mounting or hiding within set pieces. Mounting holes are also provided for safety chains and secondary fixings for additional safety or to allow routing of cables.


Network ports: 4
DMX universes: 2
DMX ports: 6 (three per universe)
Power input: 90-250V AC or PoE

Width: 187mm
Height: 70mm
Depth: 300mm
Weight: 2Kg

Pris exkl.9457

Kom igång med ditt ljusbord!

Produkten har lagts i din varukorg Visa varukorgenTill kassan