För att ge dig bättre service använder vi cookies. Genom att fortsätta på sidan godkänner du vår användning av cookies.
Sök i resultat
Antal träffar 11
20050310816-LDDE
LDDE SpectraDim64/V-B LED Dimmer/Driver 6x8A DMX
Pris exkl.3 154.00
Köp
ST
Mycket kompakt DMX-styrd LED-Dimmer/Driver för 6 kretsar.
Special utvecklad LED driver m soc® Software för bästa dimningskvalité
Dimrar helt perfekt från 0-100%, DMX512, BCD switch.
PWM frekvens 8kHz. (flickerfree och därmed användbar för HDTV)
In 12-48VDC (2x24Amax), Ut 8A max/krets, IP 20
 
 

A9915015-ARTE
Artecta LED DIM-3  3-kretsar LED dimmer DMX
Pris exkl.895.62
Köp
ST

Specifications

DMX Control or Manual Control

• Power Supply: DC 12-24V
• Load @ 12V: max. 1.66A/Channel (5A total /60W)
• Load @ 24V: max. 1.33A/Channel (4A total /96W)
• Housing: Black Polycarbonate
• DMX in: 3-pin green terminal
• DMX out: 3-pin green terminal
• 0-10V in: 2-pin green terminal
• 12-24V DC in: 2-pin green terminal
• PWM out: 4-pin terminal
• Operation temperature: 0°C to 40°C
• Storage temperature: -20°C to +70°C
ECP-106-LDX-405-KIT-LPU
LED kit Lite-Puter ECP-106 panel, LDX-405 dimmer, nätdel, LED-tejp
Pris exkl.4 349.00
Grundpris exkl.5 069.00
Köp
ST

LED Kit berstående av Panel, 4-kretsars DMX dimmer

100w nätdel samt 5m RGBW LED tejp.

Panel: ECP-106, 6 scener och öka minska, IR ingång, EDX utgång

Dimmer: LDX-405AII-LPU, DMX/EDX

Nätdel: MeanWell LPV-100-24-MW

LEDTejp: LF24-12RGBW-EE, LED-tejp list RGBW  IP20 17,5W/m  24V  L=5m  RA80+

LDX-1201-LPU
Lite-Puter LED Dimmer LDX-1201, 12x1A, DMX, DC 12-48V
Pris exkl.1 786.00
Köp
ST
  • Power Input: DC 12-28V
  • Protocol: DMX-512
  • Capacity: 12CH, 1A per channel, total: 12A
  • Sigal Connector: 3 PIN green terminal
  • Dimension: 225(W)*72(H)*44(D)mm
  • Weight: 420g
LDX-405AII-LPU
Lite-Puter LED Dimmer LDX-405AII, 4x5A, DMX/EDX, DC 12-36V
Pris exkl.1 786.00
Köp
ST

Features:

  • Built-in 33 modes: 31 standalone modes *1, DMX mode, and intelligent mode *2 
  • Can store scenes, adjust dimming level, adjust chaser speed, and recall 33 built-in modes by remote controller (optional IR-0501).
  • Connectable to ECP control panel.
  • Can store 7 scenes (SC1~6+OFF) and recall the scene by IR-0501 or ECP control panel.
  • PWM: 4096 steps.

 


Specifications:

  • Power Input: DC 12-28V
  • Protocol: DMX-512/ RS-485 (EDX)
  • Capacity: 5A per channel; >20V 3A per channel; >20V 5A per channel for short time usage
  • Signal Connector: 3 PIN green terminal
  • Dimension: 228(W)*60(H)*40(D)mm
  • Weight: 300g
LEDD12-TTL
TTL LED Driver12, 12 ch dimning av LED:s
Pris exkl.9 945.00
Köp
ST
12-kanals dimmer för flickerfri dimning av LED:s
Nätdel krävs för att mata dimmern.
DMX-styrd
145x235x43mm, 1,2 kg
EXKLUSIVE NÄTDEL!
 
12 channels triacdimmer for  absolute flicker free led light dimming. 
For each channel the maximum output current can be set from 0,1[A ] up till 3,6[A.] To get a higher drive capacity it is possible to connect two or more outputs in parallel. 
For each channel three different control curves can be set: non-dim, linear and LED light source 
Power supply voltage may lay in the range of 12V,....,60V 
3-digit led display for setting and displaying the DMX address 
DMX512 input galvanic isolated, fail save for open input and protected against over voltage.  
Led indication for DMX512 present 
Hold of DMX-data by lost of signal can be set on or off 
All components are PCB mounted (no internal wiring) 
Very compact design suitable for distributed placement
Specs:
Mains: 4-pole male WAGO connector (42[A]); LEDdriver12 comes with a 4-pole female WAGO connector to connect the power supply. 
The output is on three times an 8-pole female WAGO connectors; LEDdriver12 will be delivered inclusive three 8-pole WAGO male connectors 
DMX-input: 5 pole XLR male, NEUTRIK, PCB- mounted  
DMX-through: 5- pole XLR  female, NEUTRIK, PCB- mounted 
LUMENDIM2MICRO-RC
RC4 LumenDim2 Micro trådlös 2-K dimmer CRMX

RC4 Series 3 LumenDimM2 Micro

The new RC4 Series 3 LumenDimM2 Micro is a battery-powered 2-channel wireless DMX dimmer for small props, costumes, and more.  A genuine LumenRadio TiMo radio transceiver is built-in, providing an outstanding wireless RDM (remote device management) experience.

It includes a built-in radio receiver and two pulse-width-modulation dimmers.  With super-smooth LED dimming, halogen dimming, hobby servo-motor control, HSL color control, a sophisticated effects engine, and DMX input/output, it is a powerhouse in a tiny package.

 

RC4 Series 3 LumenDimM2 Micro Specifications

Dimensions: 74mm x  19.8mm x 11mm

Power Input: 6VDC – 35VDC, 0.35W idle draw, ~88% regulation efficiency, Amp MTA-100 connections

Dimmer Outputs: 2 low-voltage DC dimmers, Amp MTA-100 connections, 16-bit resolution PWM (65,536 steps)

Dimmer Output Power: 10A non-continuous, 4A continuous

Maximum Total Power Handling: 6A (limited by rating of MTA-100 connector terminals)

Multiple PWM frequencies: 77Hz (high power), 615Hz (best for human vision), 1250Hz, 5kHz (artifact free for video), 10kHz, 20kHz (noise free for audio), 40kHz.

Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW).

RC4 Digital Persistence™: 8 user-selectable persistence periods emulating a range of filament lamps

Series 3 Versatility: wired and wireless DMX dimming, RC4 Flkr Effects Engine™, RC4 HSL Color Controller, RC4 ColorMatch™, RC4 HotPatch™, extensive wired RDM support.

Sensors: Input voltage

DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support.

Wireless DMX Protocol: LumenRadio CRMX

RF Antenna: internal, omnidirectional.  (Special order versions at extra charge available for use with external antennas via u.fl connector.)

LUMENDIMM2-RC
RC4 LumenDim M2 Miniatyr trådlös 2-K dimmer CRMX

The RC4 Series 3 LumenDimM2 

is a miniature wireless DMX receiver and 2-channel DC dimmer for use with LumenRadio CRMX transmitters.  It provides full RDM support.  The device operates from 6V to 35VDC, to a maximum total load of 16A.  All features of RC4 Harmonized Design are included: high power, high resolution, modes for video and audio applications, dual-color cross-fade control, built-in effects engine, and more.

 

 

 

The most economical wireless dimmer in the LumenDim class, the RC4 Series 3 LumenDimM2 provides two dimmers.  Like all RC4 Series 3 devices, it includes a built-in radio receiver and uses RC4 OneTouch™ for easy assignment of any DMX channel and dimmer curve to either dimmer with a single press of a single button.  Device configuration can also be done with Remote Device Management (RDM) .

Two channels are ideal for warm/cool (or other dual-color) LED color-mixing.  The RC4 Cross-Fade Controller delivers best-in-class color mix consistency over the entire dimming range, by ensuring precise primary color ratios even at very low dimmer levels using 16-bit (65,536 step) dimming.  Unlike single-channel DMX control of color mix from a console, which is limited to 256 steps and becomes heavily quantized at low levels, the RC4 Cross-Fade Controller maintains high ratiometric precision throughout the dimming range.

The warmth of incandescent lighting has long been favored by lighting designers, and for good reason; natural filament persistence ensures smooth fades even when control resolution is relatively coarse.  RC4 Digital Persistence™ brings this same pleasing smoothness to LED dimming, with a range of  eight persistence periods emulating a variety of halogen lamp sizes.  LEDs have never looked this good.

Many pulse-width-modulation (PWM) dimmers look good to the human eye, but produce banding, blinking, and other anomalies when used with video cameras.  For this reason, all RC4 Series 3 dimmers provide multiple PWM frequencies.  Low frequencies are most efficient, ideal for high-wattage incandescent lighting.  Mid frequencies improve the appearance of LEDs by eliminating visible strobing in human peripheral vision.  High frequencies eliminate video artifacts.  And finally, supersonic PWM frequencies, though least efficient for power handling, provide PWM dimming without audio interference when used near microphones and electified musical instruments.

Two dimmer outputs also provide an effective experience with the RC4 Wireless Flkr Effects Engine.  Using DMX channels for control, dynamic animated effects are easily and quickly created — this is not a canned effect generator, it is a tool for creating unique looks to suit any need.  Effects can also be stored and recalled, and a saved effect can be enabled on power-up.  This provides a means of creating and using custom effects without an external DMX controller — perfect for standalone displays in retail, trade shows, and more.

The RC4 Series 3 LumenDimM2, and all RC4 Series 3 dimmers, provides a wired DMX data port.  In most cases this port is used to output data to nearby fixtures including fog machines, moving lights, and projector dousers.  The DMX port can also be configured as a DMX input, allowing the LumenDimM2 to be used as a wired dimmer.  Either wireless or wired, a comprehensive RDM implementation includes E1.37 dimmer configuration parameters, numerous status sensors (voltage, temperature, current), and each individual dimmer appears as an RDM sub-device.

With all that’s going on inside RC4 Series 3 dimmers, a means of routing signals within the device is needed.  RC4 HotPatch™  is the answer.  In the default mode, dimmers are directly controlled by DMX channels they are assigned to; the flicker effects engine and HSL color controller are bypassed.  From there,  RC4 HotPatch™ provides numerous other configurations, enabling internal processes with signal flow following a variety of paths.

The RC4 Series 3 LumenDimM2 includes all RC4 Series 3 Harmonized Design features, including:

Screw terminals are provided for connection of the power supply (+/-DC IN) and load devices (+/-DimA, +/-DimB). The supply powers both the internal electronics and the connected loads. Dimmers switch on the negative side of the circuit, ideal for common-anode (common positive) LED tape.  Dimmer output voltage is precisely the DC power input voltage with no appreciable losses within the 16A total power handling limit of the device.

The DMX miniplug port can be used with a range of RC4 DMX cables, including 3-pin and 5-pin male and female XLR adaptors.  The most common adaptor is the RC4DMX5FA with 5-pin female XLR connector.

 

RC4Magic Series 3 LumenDimM2 Specifications

Dimensions: 80mm x 40mm x 20mm

Power Input: 6VDC – 35VDC, 0.4W idle draw, ~87% regulation efficiency, screw terminal connections

Dimmer Outputs: 2 low-voltage DC dimmers, screw terminal connections, 16-bit resolution PWM (16,384 steps)

Output Power, per Dimmer: 10A non-continuous, 5A continuous

Maximum Total Power Handling: 16A (limited by rating of input screw terminals)

Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio), 40kHz (super-slow-motion video)

Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW).

RC4 Digital Persistence™: 8 user-selectable persistence periods emulating a range of filament lamps

Series 3 Versatility: wired and wireless DMX dimming, RC4 Flkr Effects Engine™, RC4 Cross-Fade Controller, RC4 HotPatch™, extensive wired and wireless RDM support.

Sensors: Input voltage, internal temperature, total current draw (sum of 2 dimmers)

DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support.

Wireless DMX Protocol: LumenRadio CRMX

RF Antenna: RP-SMA external, omnidirectional.  Alternate antennas can be used for increased sensitivity and directionality.

 

LUMENDIM-M4-RC4
RC4 Lumendim M4 trådlös mini dimmer CRMX
Pris exkl.6 478.00
Köp
ST

The RC4 Series 3 LumenDimM4

is a miniature wireless DMX receiver and 4-channel DC dimmer for use with LumenRadio CRMX transmitters.  It provides full RDM support.  The device operates from 6V to 35VDC, to a maximum total load of 10A.  All features of RC4 Harmonized Design are included: high power, high resolution, modes for video and audio applications, HSL color control, built-in effects engine, and more.

 

RC4Magic Series 3 LumenDimM4 Specifications

Dimensions: 80mm x 40mm x 20mm

Power Input: 6VDC – 35VDC, 0.4W idle draw, ~87% regulation efficiency, screw terminal connections

Dimmer Outputs: 4 low-voltage DC dimmers, screw terminal connections, 16-bit resolution PWM (16,384 steps)

Output Power, per Dimmer: 10A non-continuous, 5A continuous

Maximum Total Power Handling: 16A (limited by rating of input screw terminals)

Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio)

Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW).

RC4 Digital Persistence™: 8 user-selectable persistence periods emulating a range of filament lamps

Series 3 Versatility: wired and wireless DMX dimming, RC4 Flkr Effects Engine™, RC4 HSL Color Controller, RC4 HotPatch™, extensive wired and wireless RDM support.

Sensors: Input voltage, internal temperature, total current draw (sum of 4 dimmers)

DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support.

Wireless DMX Protocol: LumenRadio CRMX

RF Antenna: RP-SMA external, omnidirectional.  Alternate antennas can be used for increased sensitivity and directionality.

RC4-DMX5FA-RC
RC4 3.5mm Miniplug till 5-Pin XLR (Hona) Adapter kabel

Adapter kabel för RC4 Wireless W-DIM, LumenDim och RC4Magic

Series 3 enheter som är utrustade med 3.5mm DMX port.

Annonser
0 Produkter
Totalt 0 SEK
Priser exkl. moms