Andra generationen av den populära lilla "no-nonsens" downkonverter med 3G/HD/SD-SDI input (med loop) och NTSC/PAL komposit output.
Nu med HDMI samt de-embedded analog audio output. Kan konfigureras och styras från en dator (PC/MAC) - se ovanstående länk.

Replacing the earlier DECIMATOR product, it retains the earlier feature set and includes a HDMI Output and the ability to output de-embedded analogue audio via 2 x RCA connectors.

Features

• Your choice of either a NTSC or PAL output
• Auto Detects 3G, HD or SD (26 formats in total) and can handle switching of synchronous sources, perfect for use on the end of routers.
• HDMI Output - the input is passed unscaled.
• De-embedded Analogue Audio is output on 2 x RCA Connectors at -10dBu = -20dBFS.
• Down-converted Composite output
  - NTSC or PAL is selectable for 3G/HD inputs
  - SD will be passed unchanged
  - Low latency 3G/HD to SD Down-conversion with ARC (Aspect Ration Conversion) of either:
  i)  16:9 to 16:9 Anamorphic
  ii)  16:9 to 4:3 Letterbox
  iii)  16:9 to 4:3 Centre Cut (Crop to 4:3)
  - Full 10-bit data path and multipoint interpolation
  - 16 times over-sampling for Composite Output

• 3G/HD/SD-SDI Active Loop-through Output
• External Dipswitch Configuration
• USB port for control and updates
• Locking DC Power Socket
• Dimensions: 90x71x23 mm
  
  The following is also included with the unit:
  Power supply, HDMI cable, USB cable and Mounting Bracket.

4 x 3G/HD/SD-SDI input med 1 x SD-SDI eller komposit output (quadsplit signal).

The DECIMATOR-QUAD from Decimator Design is a low cost, minature 3G/HD/SD-SDI 4 to 1 Quad Split or Down Converter with 4 to 1 input multiplexer.

 

Warranty for all Decimator Design products is 3 years.

 

 

NEW: Support for both 3G level A and B on the inputs.

 

•  Low cost miniature (3G/HD/SD)-SDI 1 to 16 channel Multi-Viewer

•  Custom Layouts with various standard layouts

•  16 Character UMD overlay per window with individual enables,

    custom positioning and size

•  Audio ID overlay

•  Load and restore Custom Layouts

•  Fast switching between inputs using Full-Screen scaling

•  Selectable output format in both Full-Screen and Multi-Viewer mode

•  Low latency buffering for each input allowing non-synchronous

    inputs

•  16 x (3G/HD/SD)-SDI inputs with auto detection

    (26 Formats supported in total)

•  Each window is independent of the others, allowing any

    3G/HD/SD format of any frame rate to be displayed

    simultaneously

•  Variable aspect ratios per window

•  Pass-Through mode allowing any of the 16 inputs to be

    selected and routed to the the HDMI output

•  In Pass-Through mode the selected input is passed through

    to the HDMI output

•  The DMON-16SL is a truly portable converter, that incorporates

    our new easy to use LCD and button control system. This

    gives you easy access to most of the amazing features without

    using complicated LED/button control, dip switches or having to

    carry around a computer to change a simple setting.

•  This unit also includes:

    -  USB port for control and firmware updates

    -  Heavy duty metal box

    -  Metal Thread Locking DC Power Socket

    -  Power Supply, HDMI Cable and USB Cable

Warranty for all Decimator Design products is 3 years.

•  Low cost miniature (3G/HD/SD)-SDI 1 to 16 channel Multi-Viewer or

    16 to 1 input multiplexer

•  Custom Layouts with various standard layouts

•  16 Character UMD overlay per window with individual enables,

    custom positioning and size

•  8 Channel Audio Metering overlay per window with individual

    enables, custom positioning and size

•  Safe Action and Safe Title overlay per window with individual

    enables and adjustment

•  Centre Cross overlay per window with individual enable

•  Audio ID overlay

•  Tallies can be applied to either Tally Boxes (Default),

    Outside Safe Action Area or Border

•  Tally boxes allows for up to 4 Tallies per window

    (Green, Red, Blue and Yellow)

•  Load and restore Custom Layouts

•  Fast switching between inputs using Full-Screen scaling

•  Selectable output format in both Full-Screen and Multi-Viewer mode

•  Low latency buffering for each input allowing non-synchronous

    inputs

•  Linked (3G/HD/SD)-SDI and HDMI outputs

•  16 x (3G/HD/SD)-SDI inputs with auto detection

    (26 Formats supported in total)

•  Each window is independent of the others, allowing any

    3G/HD/SD format of any frame rate to be displayed

    simultaneously

•  Variable aspect ratios per window

•  Pass-Through mode allowing any of the 16 inputs to be

    selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs

•  The DMON-16S is a truly portable converter, that incorporates

    our new easy to use LCD and button control system. This

    gives you easy access to most of the amazing features without

    using complicated LED/button control, dip switches or having to

    carry around a computer to change a simple setting.

•  This unit also includes:

    -  32 GPI on 37-pin D-SUB connector for Tallies and Remote Switching

    -  RS422/485 on 37-pin D-SUB connector for Dynamic UMD and

       Tallies via TSL protocol

    -  USB port for control and firmware updates

    -  Heavy duty metal box

    -  Metal Thread Locking DC Power Socket

    -  Power Supply, HDMI Cable and USB Cable

Warranty for all Decimator Design products is 3 years.

The DMON-4S is the latest converter to come from Decimator Design. Launched at NAB 2013, it's a Broadcast Engineering PICK HIT 2013 Winner.

The DMON-4S is a truly portable converter, that incorporates Decimator Design's new easy to use LCD and button control system. This gives easy access to all of the amazing features without using complicated LED/button control, dip switches or having to carry around a computer to change a simple setting.

A Quad (3G/HD/SD)-SDI to HDMI multiviewer and converter, the preliminary specification features

 

NEW: Support for both 3G level A and B on the inputs.

NEW: Horizontal and/or Vertical image flipping per window

 

•  Includes 4 independent mini HDMI outputs that can each output any

    of the four (3G/HD/SD)-SDI inputs or a Multi-View of all them.

    For example you could use the unit to have:

      - 4 independent SDI to HDMI converters

      - 3 independent SDI to HDMI converters with a quad-split output

      - 2 independent SDI to 2 x HDMI converters with loop through

      - A single SDI or Multi-View to 4 x HDMI outputs

 

•  Inputs 2 and 4 can be individually changed to output active loop

    copies of inputs 1 and 2 respectively.

 

•  (NEW) Multi-View mode offers:

 

   - Custom Layouts with various standard layouts

   - Load and restore Custom Layouts

   - Fast switching between inputs using Full-Screen scaling

   - Selection of audio from any input

   - 16 Character UMD overlay per window with individual enables,

      custom positioning and size

   - Low latency buffering for each input allowing non-synchronous

      inputs

   - Each window is independent of the others, allowing any

      3G/HD/SD format of any frame rate to be displayed

      simultaneously

   - Variable aspect ratios per window

 

•  The DMON-4S is a truly portable converter, that incorporates our new

    easy to use LCD and button control system.

 

•  This unit also includes:

      - USB port for control and firmware updates

      - Heavy duty metal box

      - Metal Thread Locking DC Power Socket

      - Power Supply, HDMI Cable and USB Cable

Warranty for all Decimator Design products is 3 years.

 

NEW: Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.

 

•  Low cost miniature (3G/HD/SD)-SDI 1 to 6 channel Multi-Viewer or

    6 to 1 input multiplexer

•  6 x (3G/HD/SD)-SDI active loop copies of each input

•  Custom Layouts with various standard layouts

•  16 Character UMD overlay per window with individual enables,

    custom positioning and size

•  16 Channel Audio Metering overlay per window with individual

    enables, custom positioning and size

•  Safe Action and Safe Title overlay per window with individual

    enables and adjustment

•  Centre Cross overlay per window with individual enable

•  Audio ID overlay

•  Tallies can be applied to either Tally Boxes (Default),

    Outside Safe Action Area or Border

•  Tally boxes allows for up to 4 Tallies per window

    (Green, Red, Blue and Yellow)

•  Load and restore Custom Layouts

•  Fast switching between inputs using Full-Screen scaling

•  Selectable output format in both Full-Screen and Multi-Viewer mode

•  Low latency buffering for each input allowing non-synchronous

    inputs

•  Linked (3G/HD/SD)-SDI and HDMI outputs

•  6 x (3G/HD/SD)-SDI inputs with auto detection

    (6 Formats supported in total)

•  Each window is independent of the others, allowing any

    3G/HD/SD format of any frame rate to be displayed

    simultaneously

•  Variable aspect ratios per window

•  Pass-Through mode allowing any of the 6 inputs to be

    selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs

•  The DMON-6S is a truly portable converter, that incorporates

    our new easy to use LCD and button control system. This

    gives you easy access to most of the amazing features without

    using complicated LED/button control, dip switches or having to

    carry around a computer to change a simple setting.
•  5-32 VDC (PSU included)

•  This unit also includes:

    -  32 GPI on 37-pin D-SUB connector for Tallies and Remote Switching

    -  RS422/485 on 37-pin D-SUB connector for Dynamic UMD and

       Tallies via TSL protocol

    -  USB port for control and firmware updates

    -  Heavy duty metal box

    -  Metal Thread Locking DC Power Socket

    -  Power Supply, HDMI Cable and USB Cable

 

Warranty for all Decimator Design products is 3 years.

 

• Full support för input/output av 3G level A & B som därmed tillåter konvertering mellan A och B
• Flippa bilden horisontalt (upp-och-ner) och/eller vertikalt (spegelvänt).
   
• Combines several converters for the price of one
• Features the following 14 modes:
•   1.  SDI IN to HDMI and SDI OUT
•   2.  SDI IN to SDI OUT and HDMI IN to HDMI OUT
•   3.  SDI IN to SDI OUT and Scaled SDI IN to HDMI OUT
•   4.  SDI IN to SDI OUT and Scaled HDMI IN to HDMI OUT
•   5.  HDMI IN to SDI OUT and SDI IN to HDMI OUT
•   6.  HDMI IN to HDMI and SDI OUT
•   7.  HDMI IN to SDI OUT and Scaled SDI IN to HDMI OUT
•   8.  HDMI IN to SDI OUT and Scaled HDMI IN to HDMI OUT
•   9.  Scaled SDI IN to SDI OUT and SDI IN to HDMI OUT 
• 10.  Scaled SDI IN to SDI OUT and HDMI IN to HDMI OUT 
• 11.  Scaled SDI IN to HDMI and SDI OUT 
• 12.  Scaled HDMI IN to SDI OUT and SDI IN to HDMI OUT 
• 13.  Scaled HDMI IN to SDI OUT and HDMI IN to HDMI OUT

  14.  Scaled HDMI IN to HDMI and SDI OUT

• 4 x (3G/HD/SD)-SDI outputs, that allow it to be used as a 1 to 4 distribution amplifier. Output pair 1 can either be a copy of the SDI input (default) or the same as pair 2.
• The audio pairs in the SDI and HDMI outputs can be rearranged as required.
• The HDMI or SDI input to be scaled and/or frame rate converted to the required standard.

Anmärkning: MD-HX & MD-CROSS är samma produkt, men MD-CROSS har en inbyggd test generator och s.k. overlays.

 

 

Inkluderar nätdel med USB utgång och USB kabel.

 

The MD-QUAD from Decimator Design is their new low cost, minature 3G/HD/SD-SDI 4 to 1 Quad Splitter or 4 to 1 input multiplexer, featuring linked (3G/HD/SD)-SDI and HDMI Outputs.

Features

• Low cost, miniature (3G/HD/SD)-SDI 4 to 1 Quad Split or 4 to 1 Input Multiplexer
• Selectable output format in Quad-split mode
• Low latency buffering for each input allowing non-synchronous inputs
• Linked (3G/HD/SD)-SDI and HDMI Outputs
• 4 x (3G/HD/SD)-SDI inputs with auto-detection (26 formats supported in total)
• Each quadrant is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
• Variable aspect ratios per quadrant
• All 4 inputs can be displayed simultaneously on a single output
• Full-screen mode allowing any of the 4 inputs to be selected for output
• In Full-screen mode the selected input is passed through to both the (3G/HD/SD)-SDI and HDMI Outputs
• An extensive selection of user controllable functions via an easy to use rotary encoder for menu selection. LEDs and a push button can then be used for status and control
• USB Port for control and updates
• GPI on RJ-45 for remote switching
• Test Pattern Generator & Audio Tone Generator
• Locking DC power socket
• Mounting bracket included
• Powersupply included